Open Molding

The Open Molding Department features 4 chopper guns that are supplied by a 53,000 gallon bulk resin system. Other features are a back coating system and a hand lay up station. A state-of the-art heated and cooled ventilation system ensures that a >50 ppm styrene level is maintained.

Light Resin Transfer Molding (LRTM)

A fully looped vacuum system features over 100 mold stations. A specifically designed resin flow system delivers precise amounts of resin to each mold.

Gel-Coat

Our Gel-Coat Department features a temperature controlled storage and pump room. The gel-coat is sprayed via 8 color pumps and 2 gun booms. A computer controlled, heated and cooled ventilation system ensures that a >50 ppm styrene level is maintained.

Trim Department

This department is a fully enclosed positive pressure environment. A computer controlled re-circulating filtered ventilation system ensures that no dust is directly discharged into the environment.

Finishing Department

Our Finishing Department is easily adaptable to several product lines. A step- by-step process line is used versus the traditional work booth process.

Shipping / Receiving / Warehouse

Finished products are stored indoors until they are ready for shipment.

Tooling Storage

All of our molds that are not currently in production are stored indoors. This climate- controlled environment ensures that the life of the mold is not reduced by expsoure to extreme heat or cold as well as U.V. damage.

Custom / Tooling Department

From small molds to large architectural projects, this department is where most of the hand fitting and detail work is completed.